Home
News
Contact
Sitemap
About the Contact Point
CE marking and rules
Standards
Dansk
 
Topbillede

Standards in the horizon

Search the list with a free text search or for certain standard groups

Here you can search for a group of construction products or use the free text search. The functions can be combined.

This list shows you which standards are in the process of being adopted at European level.

If you stay up-to-date on this list, you will be able to readjust in time, if there are any upcoming changes in your field.

By clicking on each standard, you will under “Comment” see how far along the decision process is. It is not possible to say when the date for obligatory CE marking from the standard will be published.

Here the decision process (somewhat simplified) is divided into three phases:

  • Drafts for standards – possible drafts in the public hearing (inquiry phase)
  • Completed draft standard during approval
  • Approved, but not published by the Commission

Go to Applicable standards

Go to Soon Applicable standards

Group: Standard Number: Standard:
Adhesives - M127 EN 12004-01 Adhesives for tiles - Part 1: Requirements, evaluation of conformity, classification and designation
Aggregates - M125 EN 16236 Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control
Aggregates - M125 EN 13055 Lightweight aggregates for concrete, mortar, grout, bituminous mixtures, surface treatments and for unbound and bound applications
Aggregates - M125 EN 13055 Lightweight aggregates for concrete, mortar, grout, bituminous mixtures, surface treatments and for unbound and bound applications
Bearing metal constructions - M120 EN 10248-01 Hot-rolled steel sheet piling - Part 1: Technical delivery conditions
Bearing metal constructions - M120 EN 10249-01 Cold formed steel sheet piling - Part 1: Technical delivery conditions
Bearing timber structures and accessories - M112 CEN WI 00124113 Timber structures - Prefabricated structural wall, floor and roof elements - Requirements
Bearing timber structures and accessories - M112 EN 14732 Timber structures - Prefabricated structural wall, floor and roof elements - Requirements
Bearing timber structures and accessories - M112 EN 16351 Timber structures - Cross laminated timber - Requirements
Bearing timber structures and accessories - M112 CEN WI 00124118 Timber structures - Cross laminated timber - Requirements
Bearing timber structures and accessories - M112 EN 15497 Finger jointed structural timber - Performance requirements and minimum production requirements
Cement - M114 EN 13282-02 Hydraulic road binders - Part 2 : Normal hardening hydraulic road binders - Composition, specifications and conformity criteria of normal hardening hydraulic road binders
Cement - M114 EN 13282-01 Hydraulic road binders - Part 1: Composition, specifications and conformity criteria of rapid hardening hydraulic road binders
Chimneys - M105 EN 16475-03 Chimneys - Accessories - Part 3: Draught regulators and standstill opening devices - Requirements and test methods
Chimneys - M105 EN 16497-01 Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications
Chimneys - M105 EN 16475-07 Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods
Chimneys - M105 EN 1457-02 Chimneys - Clay ceramic flue liners - Part 2: Flue liners operating under wet conditions - Requirements and test methods
Chimneys - M105 EN 1457-01 Chimneys - Clay/ceramic flue liners - Part 1: Flue liners operating under dry conditions - Requirements and test methods
Chimneys - M105 EN 525 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
Chimneys - M105 EN 16475-06 Chimneys Accessories Part 6: Access components Requirements and test methods
Chimneys - M105 EN 16475-02 Chimneys Accessories Part 2: Chimney fans Requirements and test methods
Chimneys - M105 EN 16475-07 Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods
Chimneys - M105 EN 16497-02 Chimneys - Concrete System Chimneys - Part 2: Balanced flue applications
Chimneys - M105 EN 14471 Chimneys - System chimneys with plastic flue liners - Requirements and test methods
Components for water supply and drainage systems - M110 EN 13566-03 Plastics piping systems for renovation of underground non-pressure drainage and sewerage
Components for water supply and drainage systems - M110 EN 545 Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements
Concrete, mortar and grout - M128 EN 1504-08 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity
Concrete, mortar and grout - M128 EN 1504-08 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity
Concrete, mortar and grout - M128 CEN WI 00104341 Hydraulic silica-calcium fume for concrete - Definitions, requirements and conformity criteria
Concrete, mortar and grout - M128 EN 16622 Hydraulic silica-calcium fume for concrete - Definitions, requirements and conformity criteria
Doors and windows - M101 EN 14351-02 Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
Doors and windows - M101 EN 1906 Building hardware - Lever handles and knob furniture - Requirements and test methods
Doors and windows - M101 EN 15685 Building Hardware - Locks and latches - Multipoint locks and their locking plates - Requirements and test methods
Doors and windows - M101 CEN WI 00033360 Building hardware - Single swing spring hinge closing devices - Requirements and test methods
Doors and windows - M101 EN 16361 Powered pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing and hinged type, initially designed for installation with power operation without resistance to fire and/or smoke leakage characteristics
Doors and windows - M101 EN 13633 Building hardware - Electrically controlled panic exit systems for use on escape routes - Requirements and test methods
Doors and windows - M101 EN 13637 Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods
Doors and windows - M101 CEN WI 00033380 Windows, pedestrian doorsets and Industrial, commercial and garage doors - Product standard, performance characteristics - Resistance to fire and/or smoke leakage characteristics
Doors and windows - M101 EN 16034 Windows, pedestrian doorsets and Industrial, commercial and garage doors - Product standard, performance characteristics - Resistance to fire and/or smoke leakage characteristics
Doors and windows - M101 EN 15887 Building hardware - Uncontrolled Door Closing Devices for single action doors - Requirements and test methods
Fixed fire fighting equipment - M109 EN 54-31 Fire detection and fire alarm system - Part 31 Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
Fixed fire fighting equipment - M109 EN 12259-12 Fixed firefighting systems - Sprinkler and water spray systems - Part 12: Sprinkler pumps
Fixed fire fighting equipment - M109 CEN WI 00072097 Fire detection and fire alarm systems - Part 30 Multi-sensor fire detections - Point detectors using a combination of carbon monoxide and heat sensors
Fixed fire fighting equipment - M109 EN 13565-01 Faste brandbekæmpelsessystemer - Skumsystemer - Del 1: Krav og prøvningsmetoder til komponenter
Fixed fire fighting equipment - M109 EN 12416-02 Faste brandbekæmpelsessystemer - Pulversystemer - Del 2: Beregning, udførelse og vedligeholdelse
Fixed fire fighting equipment - M109 EN 12416-01 Faste brandbekæmpelsessystemer - Pulversystemer - Del 1: Krav og prøvningsmetoder for komponenter
Fixed fire fighting equipment - M109 EN 54-31 Fire detection and fire alarm system - Part 31 Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors
Fixed fire fighting equipment - M109 EN 50291-01 Gas detectors - Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 1: Test methods and performance requirements
Fixed fire fighting equipment - M109 CEN WI 00191238 Residential sprinkler systems - Design, installation and maintenance
Fixed fire fighting equipment - M109 EN 1568-01 Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
Fixed fire fighting equipment - M109 EN 1568-02 Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids
Fixed fire fighting equipment - M109 EN 1568-03 Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids
Fixed fire fighting equipment - M109 EN 1568-04 Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
Fixed fire fighting equipment - M109 EN 1568-01 Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
Fixed fire fighting equipment - M109 CEN WI 00191224 Components for sprinkler and water spray systems - Part 13 Pump sets
Fixed fire fighting equipment - M109 CEN WI 00191287 Fixed firefighting systems Components for sprinkler and water spray systems Part 12 Sprinkler pumps
Fixed fire fighting equipment - M109 EN 13823 Reaction to fire tests for building products - Building products excluding floorings exposed to
Fixed fire fighting equipment - M109 EN 54-22 Fire detection and fire alarm system - Part 22: Resettable line type heat detectors
Fixed fire fighting equipment - M109 EN 54-26 Fire detection and fire alarm systems - Part 26: Point fire detectors using carbon monoxide sensors
Fixed fire fighting equipment - M109 EN 54-27 Fire detection and fire alarm systems - Part 27: Duct smoke detectors
Fixed fire fighting equipment - M109 EN 12259-08 Fire protection - Components for automatic sprinkler systems - Part 8: Pressure switches
Fixed fire fighting equipment - M109 EN 15871 Ventilation for buildings - Fire resisting duct sections
Fixed fire fighting equipment - M109 EN 54-30 Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors
Fixed fire fighting equipment - M109 EN 12101-09 Smoke and heat control systems - Part 9: Control panels
Fixed fire fighting equipment - M109 EN 12259-09 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge valve assemblies
Fixed fire fighting equipment - M109 EN 54-29 Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors
Fixed fire fighting equipment - M109 EN 54-28 Fire detection and fire alarm systems - Part 28: Non-resettable (digital) line-type heat detectors
Floors and coatings - M119 CEN WI 00175162 Flooring of lignified material orther than wood - Product characteristics, evaluation of conformity and marking
Floors and coatings - M119 EN 17009 Flooring of lignified materials other than wood Characteristics, evaluation of conformity and marking
Floors and coatings - M119 EN 16954 Agglomerated stone Slabs and cut-to-size products for flooring and stairs (internal and external)
Floors and coatings - M119 CEN WI 00246108 Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external)
Geotextiles - M107 CEN WI 00189172 Geosynthetic Barriers - Characteristics required for use as a fluid barrier in the construction of underground structures (other than tunnels)
Geotextiles - M107 EN 16994 Clay Geosynthetic Barriers Characteristics required for use as a fluid barrier in the construction of underground structures (other than tunnels and associated structures)
Geotextiles - M107 CEN WI 00189202 Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
Geotextiles - M107 EN 13249 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
Geotextiles - M107 EN 13250 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
Geotextiles - M107 EN 13251 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
Geotextiles - M107 EN 13252 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
Geotextiles - M107 EN 13253 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
Geotextiles - M107 EN 13254 Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams
Geotextiles - M107 EN 13255 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
Geotextiles - M107 EN 13256 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
Geotextiles - M107 EN 13257 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
Geotextiles - M107 EN 13265 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Geotextiles - M107 EN 16993 Geosynthetic barriers Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids
Glass - M135 EN 15681-02 Glass in building - Basic alumino silicate glass products - Part 2: Evaluation of conformity/Product standard
Glass - M135 EN 16477-02 Glass in building - Painted glass for internal use - Part 2: Evaluation of conformity
Heaters - M129 EN 16510-02-01 Residential solid fuel burning appliances - Part 2-1 Roomheaters
Heaters - M129 EN 16510-02-02 Residential solid fuel burning appliances - Part 2-2 Inset appliances including open fires
Heaters - M129 EN 16510-02-03 Residential solid fuel burning appliances - Part 2-3 Cookers
Heaters - M129 CEN WI 00295020 Residential heating appliances fired by solid fuel - Room sealed appliances - Requirements and test methods
Heaters - M129 CEN WI 00295032 (prEN 16510) Residential solid fuel burning appliances - Part 2-5 Slow Heat Release Appliances
Heaters - M129 EN 16510-02-05 Residential solid fuel burning appliances - Part 2-5 Slow heat release appliances
Heaters - M129 EN 16510-02-04 Residential solid fuel burning appliances - Part 2-4 Independent boilers fired by solid fuel. Nominal heat output up to 50 kW
Masonry - M116 CEN WI 00125170 Blocks for floor systems
Masonry - M116 EN 772-05 Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
Masonry - M116 EN 846-09 Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
Masonry - M116 EN 1015-12 Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates
Membranes - M102 EN 13238 Reaction to fire tests for building products - Conditioning procedures and general rules for
Membranes - M102 EN 14891 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, evaluation of conformity, classification and designation
Pipes and tanks without contact with drinking water - M131 EN 10305-05 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
Pipes and tanks without contact with drinking water - M131 EN 1254-03 Copper and copper alloys - Plumbing fittings - Part 3 Fittings with compression ends for use with plastics pipes
Pipes and tanks without contact with drinking water - M131 EN 1254-04 Copper and copper alloys. Plumbing fittings - Part 4 Fittings combining other end connections with capillary or compression ends
Pipes and tanks without contact with drinking water - M131 EN 12285-01 Workshop fabricated steel tanks - Part 1 Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
Pipes and tanks without contact with drinking water - M131 EN 10344 Malleable cast iron fittings with compression ends for steel pipes
Pipes and tanks without contact with drinking water - M131 EN 10242 Threaded pipe fitting in malleable cast iron
Pipes and tanks without contact with drinking water - M131 EN 10284 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
Pipes and tanks without contact with drinking water - M131 EN 13160-02 Leak detection systems - Part 2 Requirements and test/assessment methods for liquid systems for tanks
Pipes and tanks without contact with drinking water - M131 EN 13160-03 Leak detection systems - Part 3: Liquid systems for tanks
Pipes and tanks without contact with drinking water - M131 EN 13160-04 Leak detection systems - Part 4 Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces
Pipes and tanks without contact with drinking water - M131 EN 13160-07 Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
Pipes and tanks without contact with drinking water - M131 EN 13160-05 Leak detection systems - Part 5: Tank gauge leak detection systems
Pipes and tanks without contact with drinking water - M131 EN 15012 Plastics piping systems - Non pressure soil and waste discharge piping components within the building structure - Requirements and test/assessment methods for pipes and fittings
Pipes and tanks without contact with drinking water - M131 EN 16397-02 Flexible couplings - Part 2 Materials and dimensions for metal banded flexible couplings
Pipes and tanks without contact with drinking water - M131 EN 10242 Threaded pipe fitting in malleable cast iron
Pipes and tanks without contact with drinking water - M131 EN 10284 Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
Pipes and tanks without contact with drinking water - M131 CEN WI EC 110229 Umbrella EN for EN 10242, EN 10284 and EN 10344 Buried and above ground piping components for fluids - Requirements and test/assessement methods for fittings made of malleable cast iron
Pipes and tanks without contact with drinking water - M131 EN 12285-03 Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings
Pipes and tanks without contact with drinking water - M131 CEN WI 00266018 Static thermoplastic tanks with secondary containment for the above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene or rotationally moulded polyethylene tanks or anionically polymerized polyamide 6 tanks with secondary containments made of steel, or blow moulded polyethylene or rotationally moulded polyethylene or anionically polymerized polamide 6 secondary containments - Requirements and test methods
Pipes and tanks without contact with drinking water - M131 EN 1254-20 Copper and copper alloys - Plumbing fittings - Part 20 Definitions, thread dimensions, test methods, reference data and supporting informations
Pipes and tanks without contact with drinking water - M131 EN 1254-06 Copper and copper alloys Plumbing fittings Part 6: Push-fit fittings
Pipes and tanks without contact with drinking water - M131 EN 1254-07 Copper and copper alloys — Plumbing fittings — Part 7: Press fittings for metallic tubes
Pipes and tanks without contact with drinking water - M131 EN 1254-08 Copper and copper alloys Plumbing fittings Part 8: Fittings with press ends for use with plastics and multilayer pipes
Pipes and tanks without contact with drinking water - M131 EN 549 Rubber materials for seals and diaphragms for gas appliances and gas equipment
Pipes and tanks without contact with drinking water - M131 EN 14636-01 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints
Pipes and tanks without contact with drinking water - M131 EN 1254-01 Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary
Pipes and tanks without contact with drinking water - M131 EN 1254-02 Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use
Pipes and tanks without contact with drinking water - M131 EN 1254-05 Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary
Pipes and tanks without contact with drinking water - M131 EN 13349 Copper and copper alloys - Pre-insulated copper tubes with solid covering
Pipes and tanks without contact with drinking water - M131 EN 15015 Plastics piping systems - Systems for hot and cold water not intended for human
Pipes and tanks without contact with drinking water - M131 EN 15266 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure
Pipes and tanks without contact with drinking water - M131 EN 15389 Industrial valves - Performance characteristics of thermoplastic valves when used as
Pipes and tanks without contact with drinking water - M131 EN 295-07 Vitrified clay pipes and fitting and pipe joints for drains and sewers - Part 7: Requirements for
Pipes and tanks without contact with drinking water - M131 EN 15012 Plastics piping systems - Soil and waste discharge systems within the building structure -
Pipes and tanks without contact with drinking water - M131 EN 15014 Plastics piping systems - Buried and above ground systems for water and other fluids under
Pipes and tanks without contact with drinking water - M131 EN 295-01 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
Pipes and tanks without contact with drinking water - M131 EN 295-04 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements
Pipes and tanks without contact with drinking water - M131 EN 295-05 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements
Pipes and tanks without contact with drinking water - M131 EN 15013 Plastics piping systems - Non-pressure drainage and sewerage systems buried in ground - Performance characteristics for pipes, fittings and their joints
Pipes and tanks without contact with drinking water - M131 EN 15070 Elastomeric packed metallic stripwound safety gas hose assemblies for the connection of domestic appliances using gaseous fuels
Pipes and tanks without contact with drinking water - M131 EN 15724 Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Secondary containments used with tanks complying with EN 13341 - Requirements and test methods
Pipes and tanks without contact with drinking water - M131 EN 809 Pumps and pump units for liquids - Common safety requirements
Pipes and tanks without contact with drinking water - M131 EN 10253-05 Butt-welding pipe fittings - Part 5: Wrought austenitic and austeniticferritic (duplex) stainless steels for use as construction products
Pipes and tanks without contact with drinking water - M131 EN 12573-01 Welded static non-pressurised thermoplastic tanks - Part 1: General principles
Pipes and tanks without contact with drinking water - M131 EN 295-06 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes
Pipes and tanks without contact with drinking water - M131 EN 12514-01 Dele til forsyningssystemer til apparater med flydende brændstof - Del 1: Sikkerhedskrav og prøvninger - Terminologi, generelle krav
Pipes and tanks without contact with drinking water - M131 EN 12514-02 Dele til forsyningssystemer til apparater med flydende brændstof - Del 2: Sikkerhedskrav og prøvninger - Fremføringspumper, kontrol og sikkerhedsudstyr, drift
Pipes and tanks without contact with drinking water - M131 EN 12514-03 Dele til forsyningssystemer til apparater med flydende brændstof - Del 3: Sikkerhedskrav og prøvninger - Ventiler og målere
Pipes and tanks without contact with drinking water - M131 EN 12514-04 Dele til forsyningssystemer til apparater med flydende brændstof - Del 4: Sikkerhedskrav og prøvninger - Ledningsrør og komponenter i rør
Pipes and tanks without contact with drinking water - M131 EN 13616-01 Overfill prevention devices for static tanks for liquid petroleum fuels - Part 1: Mechanical overfill prevention devices (Type A)
Pipes and tanks without contact with drinking water - M131 EN 13616-02 Overfill prevention devices for static tanks for liquid petroleum fuels - Part 2: Electrical overfill prevention devices (Type B)
Plaster - M 106 EN 15303-01 Design and application of plasterboard systems on frames - Part 1: General
Power, control and communication cables - M 443 EN 50575 Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
Precast concrete products - M100 EN 12602 Prefabricated reinforced components of autoclaved aerated concrete
Reinforced steel - M115 EN 10080 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Reinforced steel - M115 CEN WI EC019025 Corrosion resistant reinforcing steels
Reinforced steel - M115 ECISS TC 19 SC 2 N 574 Prestressing steels - Protected and sheathed strands for prestressing - Part 1: General
Reinforced steel - M115 EN 10348-01 Steel for the reinforcement of concrete - Galvanized reinforcing steel - Part 1 General
Road materials - M124 CEN WI 00254157 Flexible sheets for waterproofing - Synthetic sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics
Road materials - M124 EN 13285 Unbound mixtures - Specifications
Road materials - M124 EN 13587 Bitumen and bituminous binders - Determination of the tensile properties of bituminous
Road materials - M124 EN 13108-09 Bituminous mixtures - Material specifications - Part 9: Bituminous mixture for Ultra-thin layer Asphalt Concrete (UTLAC)
Road materials - M124 EN 13924-01 Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens
Road materials - M124 EN 13924-02 Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 2: Multigrade paving grade bitumen
Road materials - M124 EN 16333 Slurry surfacing - Specification for airfields
Road restraint systems - M111 EN 1790 Road marking materials - Preformed road markings
Road restraint systems - M111 EN 12966 Road vertical signs - Variable message traffic signs
Road restraint systems - M111 EN 1424 Road marking materials - Premix glass beads
Road restraint systems - M111 EN 1871 Road marking materials - Physical properties
Road restraint systems - M111 EN 12975-02 Thermal solar systems and components - Solar collectors - Part 2: Test methods
Road restraint systems - M111 EN 12975 Thermal solar systems and components - Solar collectors - General requirements
Road restraint systems - M111 EN 1317-08 Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
Road restraint systems - M111 CEN WI EC104031 Corrosion resistant reinforcing steels
Road restraint systems - M111 EN 1317-06 Road restraint systems - Pedestrian restraint systems - Part 6: Pedestrian Parapet
Sealants - M 474 EN 15651-06 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 6: Sealants for internal partition walls
Solar Energy - M369 EN ISO 22975-01 Solar Energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance
Solar Energy - M369 EN ISO 22975-02 Solar Energy - Collector components and materials - Part 2: Heat-pipe for evacuated tubes - Durability and performance
Thermal insulation - M103 EN 16977 Thermal insulation products for buildings Factory made calcium silicate (CS) products Specification
Thermal insulation - M103 EN 16497-01 Chimneys - Accessories - Part 1 Non-balanced flue applications
Thermal insulation - M103 EN 15701 Plastics - Thermoplastic jackets for insulation products for building equipement and industrial installations - Requirement and test methods
Thermal insulation - M103 EN 14315-01 Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) system before installation
Thermal insulation - M103 EN 14318-01 Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) system before installation
Thermal insulation - M103 EN 14319-01 Thermal insulating products for building equipment and industrial installations - In-situ formed Specification for the rigid foam dispensed system before installation
Thermal insulation - M103 EN 14320-01 Thermal insulating products for building equipment and industrial installations - In-situ formed Specification for the rigid foam spray system before installation
Thermal insulation - M103 CEN WI 00088357 Thermal insulation products for buildings - Factory made reflective insulation products (RI) - Specification
Thermal insulation - M103 EN 15101-01 Thermal insulation products for buildings - In-situ formed loose - fill cellulose products - Part 1: Specification for the products before installation
Thermal insulation - M103 EN 16863 Thermal insulation products for buildings - Factory made reflective insulation products (RI) - Specification
Thermal insulation - M103 EN 16491 Thermal insulation products for buildings - Factory made composite products - Specification
Thermal insulation - M103 EN 16447 Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculit (EV) products - Specification
Thermal insulation - M103 EN 16025-01 Themal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster
Thermal insulation - M103 EN 16069 Termisk isolering i byggeriet - Produkter - Fabriksfremstillede produkter af polyethylene skum (PEF) - Specifikation
Wall and ceiling linings - M121 EN 1013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and
Wall and ceiling linings - M121 EN 539-02 Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2:
Wall and ceiling linings - M121 EN 12326-03 Schist and schistose stone types for discontinuous roofing - Requirements and test methods
Wall and ceiling linings - M121 EN 16240 Light transmitting flat solid polycarbonate (PC)sheets for internal and external roofs, walls and ceilings - Requirements and test methods
Wall and ceiling linings - M121 CEN WI 00128126 prEN 12326-3 Schist and schistose stone types for discontinuous roofing - Requirements and test methods
Wall and ceiling linings - M121 EN 16153 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external roofs, walls and ceilings - Requirements and test methods
Wall and ceiling linings - M121 CEN WI 00128113 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external roofs, walls and ceilings - Requirements and test methods
Wastewater - M118 EN 124-06 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of Polypropylene (PP), Polypropylene with mineral modifiers (PP-MD), Polyethylene (PE) or Polyvinyl-chloride (PVC-U)
Wastewater - M118 EN 124 Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type
Wastewater - M118 EN 124-04 Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
Wastewater - M118 EN 12566-06 Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent
Wastewater - M118 EN 124-03 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made from steel or aluminium alloy
Wastewater - M118 EN 124-05 Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite
Wastewater - M118 EN 124-02 Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
Wood-based panels - M113 EN 312 Particleboards - Specifications
EN 16397-01 Flexible couplings - Part 1 Performance requirements
EN 1366-01 Fire resistance tests for service installations - Part 1: Ventilation ducts
CEN WI 00127293 Fire resistance tests for Cavity Barriers
EN 1366-03 Fire resistance tests for service installations - Part 3 Penetration seals
EN 1366-05 Fire resistance tests for service installations - Part 5 Service ducts and shafts
EN 13381-07 Leak detection system - Part 7 Requirements and test/assessment methods for leak detection linings
CEN WI 00165208 Flexible couplings - Part 1: Performance requirements
EN 15882-03 Extended application of results from fire resistance tests - Part 3: Penetration seals
EN 16733 Fire safety engineering -- Selection of design fire scenarios and design fires - Example of a multipurpose covered stadium
EN 10340-01 Steel castings for structural uses Part 1: General
EN 10340-02 Steel castings for structural uses Part 2: Technical delivery conditions
EN 10138-01 Prestressing steels - Part 1: General requirements
EN 10337 Zinc and zinc alloy coated prestressing steel wires and strands
EN 13381-10 Test methods for determining the contribution to the fire resistance of structural members - Part 10: Fire resistance test method for reactive and non-reactive materials which protect tension members