Home
News
Contact
Sitemap
About the Contact Point
CE marking and rules
Standards
Dansk
 
Topbillede

 

Standards in the legislation

This table lists standards referred to in the Danish Building Regulations (BR10). It is especially important to pay attention to the national annexes to the Eurocodes.

StandardTitel
EN 1990 DK NANational Annex to Eurocode 0: Basis of structural design
EN 1990 DK NA Tillæg (Amendment)National Annex to Eurocode 0: Basis of structural design
DS håndbog 105Outdoor areas for all - Planning and design - Guidelines for providing access for disabled persons
DS/INF 470Directions for technical prevention of violence and vandalism
DS 471Technical prevention against Burglar Attack
DS/EN 1990Eurocode 0: Basis of structural design
EN 1990 DK NANational Annex to Eurocode 0: Basis of structural design
DS/EN 1991-1-1Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-1 DK NANational Annex to Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
DS/EN 1991-1-2Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2 DK NANational Annex to Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
DS/EN 1991-1-3Eurocode 1: Actions on structures - Part 1-3: General actions - Snow loads
DS/EN 1991-1-3 DK NANational Annex to Eurocode 1: Actions on structures - Part 1-3: General actions - Snow loads
DS/EN 1991-1-4Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4 DK NANational Annex to Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-4 DK NA Tillæg (Amendment)National Annex to Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
DS/EN 1991-1-5Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-5 DK NANational Annex to Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
DS/EN 1991-1-6Eurocode 1: Actions on structures - Part 1-6: General actions - Actions during execution
- Actions during execution
EN 1991-1-6 DK NANational Annex to Eurocode 1: Actions on structures - Part 1-6: General actions - Actions during execution
DS/EN 1991-1-7Eurocode 1: Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-1-7 DK NANational Annex to Eurocode 1: Actions on structures - Part 1-7: General actions - Accidental actions
DS/EN 1992-1-1 + ACEurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
EN 1992-1-1 DK NANational Annex to Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
DS/EN 1992-1-2Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
EN 1992-1-2 DK NANational Annex to Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
DS/EN 1992-3Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
DS/EN 1992-3 DK NANational annex to Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
DS/EN 1993-1-1+ AC - DS/EN 1993-1-1/ACEurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-1 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
DS/EN 1993-1-2 + AC - DS/EN 1993-1-2/ACEurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
EN 1993-1-2 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
DS/EN 1993-1-3Eurocode 3: Design of steel structures - Part 1-1: General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-1-3 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-1: General rules - Supplementary rules for cold-formed members and sheeting
DS/EN 1993-1-4Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
- Supplementary rules for stainless steels
EN 1993-1-4 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
DS/EN 1993-1-5Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-5 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-5: Plated structural elements
DS/EN 1993-1-6Eurocode 3: Design of steel structures - Part 1-6: Strength and stability of shell structures
EN 1993-1-6 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-6: Strength and stability of shell structures
DS/EN 1993-1-7Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
EN 1993-1-7 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
DS/EN 1993-1-8 + AC - DS/EN 1993-1-8/ACEurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-8 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-8: Joints
DS/EN 1993-1-9 + AC - DS/EN 1993-1-9/ACEurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1993-1-9 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-1: Fatigue
DS/EN 1993-1-10 + AC - DS/EN 1993-1-10/ACEurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-10 DK NANational Annex to Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
DS/EN 1994-1-1Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
EN 1994-1-1 DK NANational Annex to Eurocode 4: Design of composite steel and concrete structures- Part 1-1: General rules and rules for buildings
DS/EN 1994-1-2Eurocode 4: Design of composite steel and concrete structures - Part 1-2: Structural fire design
EN 1994-1-2 DK NANational Annex to Eurocode 4: Design of composite steel and concrete structures - Part 1-2: Structural fire design
DS/EN 1995-1-1 + ACEurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
DS/EN 1995-1-2 + AC - DS/EN 1995-1-2/ACEurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
EN 1995-1-2 DK NANational Annex to Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
DS/EN 1996-1-1Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-1 DK NANational Annex to Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
DS/EN 1996-1-2Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-1-2 DK NANational Annex to Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design
DS/EN 1996-2Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 1996-2 DK NANational Annex to Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
DS/EN 1997-1Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-1 DK NANational Annex to Eurocode 7: Geotechnical design - Part 1: General rules
DS/EN 1999-1-1Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-1 DK NANational Annex to Eurocode 9: Design of aluminium structures - Part 1-1: General rules and rules for buildings
DS/EN 1999-1-2Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-2 DK NANational Annex to Eurocode 9: Design of aluminium structures - Part 1-2: General rules - Structural fire design
DS/EN 1999-1-3Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
EN 1999-1-3 DK NANational Annex to Eurocode 9: Design of aluminium structures - Part 1-3: Fatigue
DS/EN 206-1Concrete - Part 1: Specification, performance, production and conformity
DS 2426Concrete - Materials - Rules for application of EN 206-1 in Denmark
DS/EN 1520Prefabricated reinforced components of lightweight aggregate concrete with open structure
EN 1520 DK NANational Annex to EN 1520, Prefabricated reinforced components of lightweight aggregate concrete with open structure

StandardTitel
DS/EN 12602Prefabricated reinforced components of autoclaved aerated concrete
EN 12602 DK NANational Annex to EN 12602, Prefabricated reinforced components of autoclaved aerated concrete
DS/INF 119Glass in buildings - Guidelines for the selection and use of safety glass - Personal safety
DS/EN 1176-1Playground equipment and surfacing - Part 1: General safety requirements and test methods
DS/EN 1176-2Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings
DS/EN 1176-3Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides
DS/EN 1176-4Playground equipment and surfacing - Part 4: Additional specific safety requirements and test methods for cableways
DS/EN 1176-5Playground equipment and surfacing - Part 5: Additional specific safety requirements and test methods for carousels
DS/EN 1176-6Playground equipment and surfacing - Part 6: Additional specific safety requirements and test methods for rocking equipment
DS/EN 1176-7Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation
DS/EN 1177Impact attenuating playground surfacing - Determination of critical fall height
DS/EN 12572-1Artificial climbing structures - Part 1: Safety requirements and test methods for ACS with protection points
DS/EN 12572-2Artificial climbing structures - Part 2: Safety requirements and test methods for bouldering walls
DS/EN 12572-3Artificial climbing structures - Part 3: Safety requirements and test methods for climbing holds
DS 436Code of Practice for the groundwater drainage of structures
EN 1991-1-2Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-2 DK NANational Annex to Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
DS 428Dansk Ingeniørforening's Code of Practice for technical measures for fire protection in ventilation systems for buildings
DS 474Code for Indoor Thermal Climate
DS/EN ISO 7730Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
DS 447Code of Practice for mechanical ventilation installations
DS/EN 13986Wood-based panels for use in construction - Characteristics,
evaluation of conformity and marking
DS/EN 1992-1-1Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
DS 490Sound classification of dwellings
DS/EN 12354-6Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces
DS 700Artificial lighting in workrooms
DS 703Directions for lighting in hospitals
DS 704Lighting - Definitions
DS 705Artificial lighting in dental consulting rooms
DS 707Sports lighting - Semi-cylindrical illumination
DS/EN 12193Light and lighting - Sports lighting
DS 418Calculation of heat loss from buildings
DS/EN 13829Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method
DS/EN ISO 13788Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods
DS/EN 1997-1National Annex to Eurocode 7: Geotechnical design - Part 1: General rules
DS 452Code of Practice for thermal insulation of technical service and supply systems in buildings
DS/EN 378-2Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
DS/EN 378-3Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
DS 5129-2-1Installations for signalling and communication - Part 2-1: Cable ducts in buildings for infrastructure cables for IT&T purposes
DS/EN 60118-4Electroacoustics - Hearing aids - Part 4: Induction loop systems for hearing aid purposes - Magnetic field strength
DS 469Heating systems with water as heat conducting fluid
DS 439Code of Practice for domestic water supply installations
DS 447Code of Practice for mechanical ventilation installations
DS 428Dansk Ingeniørforening's Code of Practice for technical measures for fire protection in ventilation systems for buildings
DS/EN 308Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices
DS/EN 14511-1Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions
DS/EN 14511-2Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions
DS/EN 14511-3Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods
DS/EN 14511-4Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Requirements
DS 447Code of Practice for mechanical ventilation installations
DS 432Code of Practice for Sanitary Drainage - Wastewater Installations
DS 439Code of Practice for domestic water supply installations
DS/EN 1717Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
DS/EN 303-5Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kW - Terminology, requirements, testing and marking
DS 2187Oliefyrede luftvarmere med tvangscirkulation af luft. Konstruktion, driftsegenskaber og prøvning
Oil burning, fan-assisted air heaters
DS/EN 230Automatic burner control systems for oil burners
DS/EN 267Forced draught oil burners - Definitions, requirements, testing, marking
DS/EN 13501-5Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests
DS 1063.1Fire classification - Roof coverings
DS/EN 378-1Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
DS/EN 378-2Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
DS/EN 378-3Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
DS/EN 378-4Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
DS/EN 378-1Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
DS/EN 378-2Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
DS 469Heating systems with water as the heating medium - Conditions for the dimensioning and energy performance
DS/EN ISO/IEC 17024Conformity assessment - General requirements for bodies operating certification of persons
DS/EN ISO 9001Quality management systems - Requirements
DS 452Code of Practice for thermal insulation of technical service and supply systems in buildings
DS 418Calculation of heat loss from buildings